VI-200 dc-dc converters rev 3.6 vicorpower.com page 1 of 6 08/2014 800 927.9474 VI-200 ve-200 s nrtl cus c us ? dc-dc converters 50 to 200 watts features ? isolated output ? up to 50 w/in 3 ? curus, ctvus ? up to 90% efficiency ? size: 4.6" x 2.4" x 0.5" (116,8 x 61,0 x 12,7mm) ? remote sense and current limit ? ovp, thermal shutdown ? logic disable ? wide range output adjust ? compatible power booster modules ? zcs power architecture ? low noise fm control ? ce marked ? rohs compliant (ve-200) product highlights the VI-200 family, with over 14 million units shipped, is vicors broad series of zero- current-switching component-level dc-dc converters. operating at frequencies up to 2 mhz, VI-200 family converters offer exceptional power density, efficiency, noise performance, reliability and ease of use. booster mod- ules (vi-bxx) provide a simple, cost-effective, off-the-shelf solution for higher power output requirements. one or more boosters may be used to create synchronous arrays capable of supplying several kilowatts of output power. the flexibility of vicors power components is also available in half-size, half-power vi-j00 minimods. part numbering note: for additional packaging options, please see page 5. vi?261?cw family series input output grade power vi = non-rohs 2 = 200 0 = 12 v n =48v z =2v m =10v k =40v e = ?10 to 85c 5 v < 5 v ve = rohs b = booster v = 24 v 4 =72v y =3.3v 1 =12v 4 =48v c = ?25 to 85c u = 200 w u = 40 a 1 =24v t = 110 v 0 =5v p = 13.8 v h =52v i = ? 40 to 85c v = 150 w v = 30 a w =24v 5 = 150 v x =5.2v 2 =15v f =72v m = ?55 to 85c w = 100 w w = 20 a 2 =36v 6 = 300 v w =5.5v n = 18.5 v d =85v x = 75 w x = 15 a 3 =48v 7 = 150/300 v v =5.8v 3 =24v b =95v y = 50 w y = 10 a t =6.5v l =28v r =7.5v j =36v
VI-200 dc-dc converters rev 3.6 vicorpower.com page 2 of 6 08/2014 800 927.9474 VI-200, ve-200 VI-200 e-grade VI-200 c-, i-, m-grade parameter min typ max min typ max units test conditions inrush charge 120 x 10 -6 120 x 10 -6 200 x 10 -6 coulombs nominal line input reflected 10% 10% i in nominal line, full load ripple current ? pp input ripple rejection db 120 hz, nominal line db 2400 hz, nominal line no load power dissipation 1.35 2 1.35 2 watts converter specifications (typical at t bp = 25c, nominal line and 75% load, unless otherwise specified) 25 + 20 log ( vin ) vout 30 + 20 log ( vin ) vout 20 + 20 log ( vin ) vout input specifications low line 75% vin 2 3.3 5 5.2 5.5 5.8 6.5 7.5 10 12 13.8 15 18.5 24 28 36 40 48 52 72 85 95 voltage max power transient [b] designators zy0xwvtrm1p 2n3ljk4hfdb nom. (range) 12 (10-20) n/a 22 0 xxxxxxxxxxxxxxxxxxxxxx 24 (10-36) n/a n/a v --xyyyyyxxxxxxxxxxx-------- 24 (21-32) 18 36 1 uuuuuuv vuuuuuuuuuuuuuu 24 (18-36) n/a n/a w vvvvvvwwvvvvvvvvvvvvvv 36 (21-56) 18 60 2 wv wwwwwwwwwwwwwwwww -- -- -- 48 (42-60) 36 72 3 uuuuuuuuuuuuuuuuuuuuuu 48 (36-76) n/a n/a n vuuuuuuuuuuuuuuuuuuuuu 72 (55-100) 45 110 4 uuuuuuv vuuuuuuuuuuuuuu 110 (66-160) n/a n/a t vvvvvvwwvvvvvvvvvvvv---- 150 (100-200) 85 [c] 215 5 uu vvvvv vuuuuuuuuuuuuuu 150 (100-375) n/a n/a 7 ww y y y ywwwwwwwwwwwww -- -- -- 300 (200-400) 170 [d] 425 6 uuuuu uv vuuuuuuuuuuuuuu maximum power available for vi-2xx-xx [a] [a] for additional output power, ?booster? modules are available. (vi-bxx-xx) [c] 15 vout, 200 w models are limited to 90 vdc [b] transient voltage for 1 second. [d] 15 vout, 200 w models are limited to 185 vdc input output vout designators
VI-200 dc-dc converters rev 3.6 vicorpower.com page 3 of 6 08/2014 800 927.9474 VI-200, ve-200 VI-200 e-grade VI-200 c-, i-, m-grade parameter min typ max min typ max units test conditions setpoint accuracy 1% 2% 0.5% 1% v nom load/line regulation 0.5% 0.05% 0.2% v nom ll to hl, 10% to full load load/line regulation 1% 0.2% 0.5% v nom ll to hl, no load to 10% output temperature drift 0.02 0.01 0.02 % / c over rated temp. long term drift 0.02 0.02 %/1k hours output ripple ? pp: 2 v, 3.3 v 150 60 100 mv 20 mhz bandwidth 5 v 5% 2% 3% v nom 20 mhz bandwidth 10 ? 95 v 3% 0.75% 1.5% v nom 20 mhz bandwidth trim range [a] 50% 110% 50% 110% v nom total remote 0.5 0.5 volts 0.25 v max. neg. leg sense compensation ovp set point 125% [b] 115% 125% [b] 135% v nom recycle power current limit 105% 135% 105% 125% i full load automatic restart short circuit current [c] 20% 140% 20% 130% i full load automatic restart [a] 10 v, 12 v, 13.8 v, 15 v outputs, or ?v? input range have standard trim range 10%. consult factory for wider trim range. 3.3 v output trim range 2.20 to 3.63 v, 95 v output ?50 + 0% trim range. [b] 131% nominal for booster modules. [c] output voltages of 3.3 v or 5 v incorporate foldback current limiting; for output voltages from 5.2 v to 7.5 v consult factory; all other outputs provide constant current limiting. output characteristics converter specifications (cont.) VI-200 e-grade VI-200 c-, i-, m-grade parameter min typ max min typ max units test conditions gate out impedance 50 50 ohms gate in impedance 1000 1000 ohms gate in open circuit voltage 6 6 volts use open collector gate in low threshold 0.65 0.65 volts gate in low current 6 6 ma power sharing accuracy 0.95 1.05 0.95 1.05 control pin specifications
parameter storage operating units notes e -20 to +100 -10 to + 85 c overtemperature shutdown c -40 to +100 -25 to + 85 c 95c typical (recycle power i -55 to +100 -40 to + 85 c to restart) m -65 to +100 -55 to + 85 c VI-200 dc-dc converters rev 3.6 vicorpower.com page 4 of 6 08/2014 800 927.9474 VI-200, ve-200 VI-200 e-grade VI-200 c-, i-, m-grade parameter min typ max min typ max units test conditions efficiency 78 ? 88% 80 ? 90% baseplate to sink 0.07 0.07 c/watt with vicor p/n 20266 thermal impedance thermal shutdown [d] 90 95 105 90 95 105 c cool and recycle power (drivers only) to restart converter specifications (cont.) VI-200 e-grade VI-200 c-, i-, m-grade parameter min typ max min typ max units test conditions input to output 3,000 3,000 v rms baseplate earthed output to baseplate 500 500 v rms input to baseplate 1,500 1,500 v rms VI-200 e-, c-grade VI-200 i-, m-grade parameter min typ max min typ max units test conditions weight 5.7 6.3 6.9 6.6 7.3 8.1 ounces (160.2) (178) (195.8) (187.2) (208) (228.8) (grams) dielectric withstand characteristics thermal characteristics mechanical specifications product grade temperatures [d] no overtemp protection in booster modules.
VI-200 dc-dc converters rev 3.6 vicorpower.com page 5 of 6 08/2014 800 927.9474 VI-200, ve-200 +.030 (0,76) -.000 (0) product id this surface full r 5 6 7 8 9 4 3 2 1 pin # 1 2 3 4 5 6* 7* 8* 9 function +in gate in gate out -in +out +sense trim -sense -out * do not connect on booster modules aluminum base .01 .040 (1,0) dia (7) places solder plate over copper alloy 0.080 (2,0) dia (2) places solder plate over copper alloy .30 .015 (7,6) (0,38) 1.80 (45,7) (106,7) (12,7) (5,6) min (3,0) (116,8) (61,0) (44,5) (7,6) min .15 (3,8) 2.10 (53,3) .40 (10,2) .35 .015 (8,9) (0,38) 1.40 (35,6) 1.00 (25,4) .70 (17,8) (91,4) .50 (12,7) VI-200 4.60 3.60 .15 (3,8) 4.20 .12 .22 .50 .30 2.40 1.75 standard 0.080 (2,0) dia (2) places matte tin over copper alloy rohs standard .040 (1,0) dia (7) places matte tin over copper alloy rohs max. mechanical drawing 4.60"l x 2.40"w x 1.08"h (116,8 x 61,0 x 27,4 mm) slimmod flangeless package megamod chassis mount alternatives, one, two, or three outputs: up to 600 w busmod finmod flangeless package with integral heat sink to order the slimmod configuration add the suffix ? ? s? to the standard module part number. qty (2) grounding clips are included with each slimmod p/n 32187 available with longitudinal or transverse fins of 0.25"(6.35 mm) or 0.50"(12.7 mm) height. add the appropriate suf- fix to the module part number. qty (4) grounding clips are included with each finmod f1, f2 p/n 32185 f3, f4 p/n 32186 to order the busmod fully assembled, add suffix ??b1? to the standard module part number. to order the busmod separately: full-sized busmod ? p/n 06322 see busmod mechanical drawings for more details. 4.60"l x 1.80"w x 0.50"h (116,8 x 45,7 x 12,7 mm) longitudinal, 0.25"(6.35 mm) fins ? add suffix ?? f1? longitudinal, 0.50"(12.7 mm) fins ? add suffix ?? f2? transverse, 0.25"(6.35 mm) fins ? add suffix ?? f3? transverse, 0.50"(12.7 mm) fins ? add suffix ?? f4? 1 up ? 4.9 x 2.5 x 0.62 (124,4 x 63,5 x 15,7 mm) 2 up ? 4.9 x 4.9 x 0.62 (124,4 x 124,4 x 15,7 mm) 3 up ? 4.9 x 7.3 x 0.62 (124,4 x 185,4 x 15,7 mm) packaging options
VI-200 dc-dc converters rev 3.6 vicorpower.com page 6 of 6 08/2014 800 927.9474 VI-200, ve-200 vicor?s comprehensive line of power solutions includes high density ac-dc and dc-dc modules and accessory components, fully configurable ac-dc and dc-dc power supplies, and complete custom power systems. information furnished by vicor is believed to be accurate and reliable. however, no responsibility is assumed by vicor for its use. vicor makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication. vicor reserves the right to make changes to any products, specifications, and product descriptions at any time without notice. information published by vicor h as been checked and is believed to be accurate at the time it was printed; however, vicor assumes no responsibility for inaccuracies. testing and other quality con- trols are used to the extent vicor deems necessary to support vicor?s product warranty. except where mandated by government re quirements, testing of all parameters of each product is not necessarily performed. specifications are subject to change without notice. vicor?s standard terms and conditions all sales are subject to vicor?s standard terms and conditions of sale, which are available on vicor?s webpage or upon request. product warranty in vicor?s standard terms and conditions of sale, vicor warrants that its products are free from non-conformity to its standard specifications (the ?express limited warranty?). this warranty is extended only to the original buyer for the period expiring two (2) years after t he date of shipment and is not transferable. unless otherwise expressly stated in a written sales agreement signed by a duly authorized vicor signatory, vicor dis- claims all representations, liabilities, and warranties of any kind (whether arising by implication or by operation of law) with respect to the products, including, without limitation, any warranties or representations as to merchantability, fit- ness for particular purpose, infringement of any patent, copyright, or other intellectual property right, or any other mat- ter. this warranty does not extend to products subjected to misuse, accident, or improper application, maintenance, or storage. vico r shall not be liable for collateral or consequential damage. vicor disclaims any and all liability arising out of the application or use of any product or circuit and assumes no liability for applications assistance or buyer product design. buyers are responsible for their products and applica tions using vicor prod- ucts and components. prior to using or distributing any products that include vicor components, buyers should provide adequate design, testing and operating safeguards. vicor will repair or replace defective products in accordance with its own best judgment. for service under this warranty, the buyer must contact vicor to obtain a return material authorization (rma) number and shipping instructions. products returned without prior author ization will be returned to the buyer. the buyer will pay all charges incurred in returning the product to the factory. vicor will pay all re shipment charges if the product was defective within the terms of this warranty. life support policy vicor?s products are not authorized for use as critical components in life support devices or systems without the express prior written approval of the chief executive officer and general counsel of vicor corporation. as used herein, life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and wh ose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a s ignificant injury to the user. a critical component is any component in a life support device or system whose failure to perform can be reasonably e xpected to cause the failure of the life support device or system or to affect its safety or effectiveness. per vicor terms and conditions of s ale, the user of vicor products and components in life support applications assumes all risks of such use and indemnifies vicor against all liability and damages. intellectual property notice vicor and its subsidiaries own intellectual property (including issued u.s. and foreign patents and pending patent applications ) relating to the prod- ucts described in this data sheet. no license, whether express, implied, or arising by estoppel or otherwise, to any intellect ual property rights is granted by this document. interested parties should contact vicor's intellectual property department. vicor corporation 25 frontage road andover, ma, usa 01810 tel: 800-735-6200 fax: 978-475-6715 email customer service: custserv@vicorpower.com technical support: apps@vicorpower.com
|
